一、氣動閥門,氣動碳鋼法蘭球閥概述Outline
QJ(D/S)R型氣動閥門以壓縮空氣為動力源,接受集散控制系統(DCS),可編程控制器(PLC)等開關信號,通過電磁閥可實現對閥門快速位式控制。
QJDR氣動碳鋼法蘭球閥采用直通型鑄造閥體,球面經特殊工藝加工和硬化處理,使其表面光滑耐磨,具有壽命長、結構緊湊、動作可靠、流通能力大、流阻系數小、安裝方便及良好的切斷性能等特點。產品廣泛應用于造紙、石化、冶金、航天、食品、醫藥、水處理等行業,特別適用于高黏度和含有纖維介質的工藝控制。
氣動活塞式執行機構可分為單作用和雙作用兩種。雙作用使用在失電或失氣時,閥門處于失電或失氣時的位置,以確保繼續生產。單作用在失電或失氣時,閥門處于原始極限位置(全開或全閉),以確保生產過程處于安 全位置。
氣動閥門,氣動碳鋼法蘭球閥主要零件材質表 Form of Major Parts Materials
序號 No |
零件名稱 Accessory name |
材質 | ||
C | P | R | ||
1 |
右閥體 Bonnet |
WCB | ZG1Cr18Ni9Ti | ZG1Cr18Ni12Mo2Ti |
2 |
螺母 Nut |
35 | 1Cr18Ni9Ti | 1Cr18Ni9Ti |
3 |
墊片 Gasket |
PTFE | PTFE | PTFE |
4 |
螺柱 Stud |
35 | 1Cr18Ni9Ti | 1Cr18Ni9Ti |
5 |
閥體 Body |
WCB | ZG1Cr18Ni9Ti | ZG1Cr18Ni12Mo2Ti |
6 |
閥座 Seat |
PTFE | PTFE | PTFE |
7 |
球體 Ball |
1Cr18Ni9Ti | 1Cr18Ni9Ti | lCr18Ni12Mo2Ti |
8 |
閥桿 Stem |
1Cr13 | 1Cr18Ni9Ti | lCr18Ni12Mo2Ti |
9 |
墊片 Gasket |
PTFE | PTFE | PTFE |
10 |
填料 Packing |
PTFE | PTFE | PTFE |
11 |
襯套 Bushing |
PTFE | PTFE | PTFE |
12 |
壓蓋 Gland |
WCB | ZG1Cr18Ni9Ti | ZG1Cr18Ni12Mo2Ti |
13 |
螺栓 Bolt |
35 | 1Cr18Ni9Ti | 1Cr18Ni9Ti |
14 |
螺栓 Bolt |
35 | 1Cr18Ni9Ti | 1Cr18Ni9Ti |
15 |
連接支架 Connecting Yoke |
1Cr18Ni9Ti | 1Cr18Ni9Ti | 1Cr18Ni9Ti |
16 |
螺栓 Bolt |
35 | 1Cr18Ni9Ti | 1Cr18Ni9Ti |
17 |
連接套 Connecting Set |
35 | 1Cr18Ni9Ti | 1Cr18Ni9Ti |
18 |
氣動裝置 Pneumatic Device |
|||
19 |
位置指示器 Location Indicator |
*主要零部件及密封圈的材質亦可根據實際工況條件或用戶特殊要求設計選用。
Note: The main spare parts and sealing-ring materials of ball valve series can be designed for Options as per real working conditions and users special reauirements.
二、氣動閥門,氣動碳鋼法蘭球閥主要技術參數和技術指標Main technical parameters and technical indicators
1、氣動閥門,氣動碳鋼法蘭球閥主要技術參數Main technical parameters
公稱通徑mm | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | |
額定流量系數Kv | 21 | 38 | 72 | 112 | 170 | 275 | 380 | 512 | 941 | 1450 | 2220 | 3590 | 5130 | 7360 | 8750 | 11800 | |
公稱壓力MPa | 1.6、2.5、4.0.、6.4 | ||||||||||||||||
額定行程 Rated travel |
90° | ||||||||||||||||
固有流量特性 Inherent flow characteristic |
快開特性Quick-opening feature |
||||||||||||||||
閥體材質 Body material |
ZG230~450、ZG1Cr18Ni9Ti、ZG1Cr18Ni12Mo2Ti | ||||||||||||||||
閥座材質 Seat Material |
軟密封:PTFE、PPL;硬密封:不銹鋼 Soft Seal: PTFE, PPL; seal: stainless steel |
||||||||||||||||
閥芯材質 Spool material |
ZG230~450、ZG1Cr18Ni9Ti、ZG1Cr18Ni12Mo2Ti | ||||||||||||||||
介質溫度℃ | -40~+80、-40~+350 | ||||||||||||||||
氣源壓力Mpa | 0.4~0.6 | ||||||||||||||||
電磁閥 Solenoid valve |
電源 Power supply |
220V AC、24V DC | |||||||||||||||
防爆等級 Explosion levels |
普通型、防爆型dIIBT4(dIICT4)、本安型 Common type, explosion-proof dIIBT4 (dIICT4), intrinsically safe |
||||||||||||||||
連接形式 Connection form |
GB9113—2000(JB/T79-94) | ||||||||||||||||
泄漏量Leakage |
軟密封:VI級;硬密封:IV級 Soft sealing: VI grade; seal: IV level |
||||||||||||||||
執行機構接口 Actuator interfaces |
1/8”G NAMUR1/4”G |
注:1.DN200及以下浮動球閥;DN250及以上固定球閥
Note: 1.DN200 and below the floating ball; DN250 and above the fixed ball valve
2、氣動閥門,氣動碳鋼法蘭球閥執行機構扭轉及動作時間Action to reverse the actuator and the time
執行機構型號AGT | 63*90 | 75*90 | 83*90 | 92*90 | 110*90 | 118*90 | 127*90 | 160*90 | 210*90 | 254*90 | 255*90 | |
扭矩N.m | 400KPa | 23.2 | 40.0. | 56.0 | 77.6 | 112.8 | 168.0 | 220.0 | 440.0 | 948.0 | 1740.0 | 2172.0 |
500KPa | 29.0 | 50.0 | 70.0 | 97.0 | 141.0 | 210.0 | 275.0 | 550.0 | 1185.0 | 2175.0 | 2715.0 | |
動作時間(S) | 0.241 | 0.333 | 0.429 | 0.444 | 0.461 | 0.60 | 0.857 | 1.62 | 3.33 | 6.00 | 7.50 |
注:1、雙作用執行機構在75%負載情況下的動作時間 2、縮短動作時間可允許非標配置
Note: 1, double-acting actuators at 75% load case, the action time of 2 to shorten the operating time to allow non-standard configuration
三、允許壓差Permissible differential pressure
1、雙作用執行機構 PN1.6閥體 Double-acting valve actuator PN1.6
單位:MPa
公稱通徑(mm) | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | |
執行機構 Executive body |
氣源KPaG |
允許壓差Permissible differential pressure
|
|||||||||||||
AGT63 | 400 | 1.6 | 1.6 | 1.09 | |||||||||||
500 | 1.6 | 1.6 | 1.6 | ||||||||||||
AGT75 | 400 | 1.6 | |||||||||||||
500 | 1.6 | ||||||||||||||
AGT83 | 400 | 1.6 | 1.6 | 0.97 | |||||||||||
500 | 1.6 | 1.6 | 1.95 | ||||||||||||
AGT110 | 400 | 1.6 | 1.6 | 1.6 | |||||||||||
500 | 1.6 | 1.6 | 1.6 | ||||||||||||
AGT118 | 400 | 1.6 | 1.9 | 0.63 | |||||||||||
500 | 1.6 | 1.6 | 1.24 | ||||||||||||
AGT160 | 400 | 1.6 | 1.6 | 0.29 | |||||||||||
500 | 1.6 | 1.6 | 0.65 | ||||||||||||
AGT210 | 400 | 1.6 | 1.25 | 0.65 | |||||||||||
500 | 1.6 | 1.58 | 0.93 | ||||||||||||
AGT254 | 400 | 1.6 | 1.51 | 0.62 | 0.51 | ||||||||||
500 | 1.6 | 1.9 | 0.78 | 0.68 | |||||||||||
AGT255 | 400 | 1.6 | 1.26 | 1.43 | 0.8 | ||||||||||
500 | 1.6 | 1.26 | 1.84 | 1.05 |
2、單作用執行機構 PN1.6閥體Single-acting valve actuator PN1.6
公稱通徑(mm) | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | |
執行機構 Executive body |
氣源KPaG | 允許壓差Permissible differential pressure | |||||||||||||
AGT75 | 400 | 1.6 | 1.6 | ||||||||||||
500 | 1.6 | 1.6 | |||||||||||||
AGT83 | 400 | 1.6 | 1.6 | 0.75 | |||||||||||
500 | 1.6 | 1.6 | 1.6 | ||||||||||||
AGT110 | 400 | 1.6 | |||||||||||||
500 | 1.6 | ||||||||||||||
AGT118 | 400 | 1.6 | 1.04 | ||||||||||||
500 | 1.6 | 1.6 | |||||||||||||
AGT160 | 400 | 1.6 | 1.6 | 1.6 | 0.16 | ||||||||||
500 | 1.6 | 1.6 | 1.6 | 1.08 | |||||||||||
AGT210 | 400 | 1.6 | 1.6 | 1.02 | |||||||||||
500 | 1.6 | 1.6 | 1.6 | ||||||||||||
AGT254 | 400 | 1.6 | 1.6 | 1.32 | 0.26 | ||||||||||
500 | 1.6 | 1.6 | 1.6 | 1.1 | |||||||||||
AGT255 | 400 | 1.6 | 1.7 | 1.01 | 0.22 | 0.28 | 0.1 | ||||||||
500 | 1.6 | 1.6 | 1.71 | 0.71 | 0.6 | 0.3 |
四、可配附件Available Accessories
電磁閥、手輪機構、閥位開關、空氣過濾減壓器等。
Solenoid valve, hand wheel, valve position switch, air filter regulator and so on
五、外形尺寸和重量Dimensions and weight
1、法蘭式氣動O型固定球閥O-fixed flange ball valve pneumatic
單位:mm
公稱通徑mm | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | |
L1 | 127 | 133 | 177 | 216 | 290 | 368 | 450 | 583 | |||||||
H1 | 48 | 53 | 58 | 68 | 73 | 80 | 90 | 98 | 108 | 126 | 140 | 168 | 203 | 230 | |
H | 231 | 243 | 279 | 286 | 362 | 371 | 447 | 583 | 610 | 735 | 785 | 835 | |||
重量kg | PN1.6 | 6.8 | 7.2 | 9.0 | 14 | 18 | 27 | 34 | 49 | 89 | 116 | 201 | 246 | 341 | 458 |
PN4.0 | 6.8 | 8.6 | 11 | 16 | 22 | 33 | 42 | 58 | 107 | 138 | 242 | 295 | 410 | 546 | |
L | 108 | 117 | 127 | 140 | 165 | 178 | 190 | 203 | 229 | 356 | 394 | 457 | 533 | 610 |
2、法蘭式O型浮動球閥Flange O-floating ball valve
單位:mm
公稱通徑mm | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | |
L1 | 133 | 177 | 216 | 290 | 368 | 450 | 583 | ||||||||
H1 | 48 | 53 | 58 | 68 | 73 | 80 | 90 | 98 | 108 | 126 | 140 | 168 | 203 | 230 | |
H | 231 | 243 | 271 | 295 | 307 | 362 | 439 | 447 | 583 | 610 | 733 | 785 | 835 | ||
重量kg | PN1.6 | 7.1 | 7.8 | 11 | 16 | 20 | 31 | 35 | 52 | 94 | 125 | 210 | 257 | 370 | 500 |
PN4.0 | 8.6 | 9.0 | 12.8 | 19 | 24 | 37 | 44 | 63 | 112 | 149 | 252 | 308 | 450 | 599 | |
L | 130 | 140 | 150 | 165 | 180 | 200 | 220 | 250 | 280 | 320 | 360 | 400 | 533 | 610 |
3、意大利式氣動O型對夾球閥Italy pneumatic wafer ball valve
公稱通徑mm | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | |
L1 | 133 | 177 | 216 | 290 | 368 | 450 | ||||||
H1 | 48 | 53 | 58 | 68 | 73 | 80 | 90 | 98 | 108 | 126 | 140 | |
H | 231 | 243 | 271 | 295 | 307 | 362 | 439 | 447 | 583 | 610 | ||
重量kg | PN1.6 | 5.1 | 5.4 | 6.3 | 10.5 | 12.5 | 15 | 32 | 38 | 50 | 60 | 80 |
PN4.0 | 6.1 | 6.5 | 6.8 | 12 | 30 | 45 | 49 | 73 | 80 | 90 | 105 | |
L | 35 | 38 | 42 | 50 | 60 | 70 | 95 | 118 | 140 | 175 | 210 |
六、QJDR氣動碳鋼法蘭球閥訂貨須知Ordering Information
1、產品型號 2、公稱通徑 3、公稱壓力 4、閥體和閥內組件材料(介質性能)
5、介質溫度 6、雙作用或單作用(單作用請注明氣開式或氣關式)
1, Model 2, DN 3, PN 4, the valve body and internal components of materials (dielectric properties)
5, 6 medium temperature, double or single acting (one role please specify air or gas shut-open type)